Publicité
Installation Devices
Sources: devices with HDMI output (TV and SAT decoder, DVR, NVR, DVD player, etc.)
●
Display: TV with integrated DVB-T decoder or stand-alone decoder
●
●
Cables: HDMI High Speed; 75ohm coaxial cables
Connections
Step 1: Connect via HDMI cable the device with the HDMI source to the HDMI input port of the
●
modulator
Step 2: Connect via coaxial cable the RF output port of the modulator to the TV or splitter
●
Step 3: Connect the power cable.
●
3.1 Point-to-point connection
3.2 Point to Multi-point connection
DVD
HDMI Cable
3.3 Multi-point to Multi-point connection
Modulator
DVD
HDMI
Attention: with several modulators in cascade it is necessary to associate each source with a different
channel/frequency different LCNs, it is recommended in such cases.
3. INSTALLATION PROCEDURE
Modulator
Cable
Modulator
Coaxial Cable
10
Coaxial Cable
Coaxial Cable
CATV Splitter
CATV Splitter
Coaxial Cable
Publicité
