Publicité
HG7791_9029/9031_IB Scale.qxd:Layout 1
This scale features our convenient step-on operation. Once initialised the scale can be operated by
simply stepping straight on the platform – no more waiting!
1. Open the battery compartment on the scale underside.
2. Remove isolating tab from beneath the battery.
3. Close the battery compartment.
4. Select kg, st or lb weight mode by the switch on the underside of the scale.
5. Position scale on firm flat surface. For use on carpet attach the enclosed carpet feet.
1. Press the platform centre and remove your foot.
2. '0.0' will be displayed and then a small zero will run from left to right.
3. The scale will switch off and is now ready for use.
This initialisation process must be repeated if the scale is moved. At all other times step
straight on the scale.
1. Step on and stand very still while the scale computes your weight.
2. Your weight is displayed.
3. Step off.Your weight will be displayed for approximately 4 seconds.
4. A small zero will run from left to right and the scale will switch off.
5. If 'Err0' is displayed at this point an iniialisation error has occured, and the weight displayed is
incorrect. Repeat the operating procedure to take a correct weight reading.
Err0
Err1
Err2
bAtt
2
PREPARING YOUR SCALE
INITIALISING YOUR SCALE
OPERATING YOUR SCALE
WARNING INDICATORS
Incorrect Initialisation. Repeat operating procedure.
Unstable weight. Stand still.
Weight exceeds maximum capacity.
Replace battery.
17/8/07
14:01
Page 2
NEW FEATURE!
Publicité
