Publicité
Identifying Controls
TV controls/indicators
Front of the TV
1
2
3
1 Power LED (On: red, Off: no light, Panel maintenance
in progress: Orange)
2 C.A.T.S. (Contrast Automatic Tracking System)
3 Remote Control sensor
Maximum range for remote is 23 feet (7 meters) from
front of TV set
Back of the TV
1 Changes the input mode
Selects Menu and Submenu entries
(Press and hold down for MENU function)
2 Selects channels in sequence
3 Volume up/down
4 POWER button
An image of the control panel is displayed on the
•
screen while in use.
Note
●
The TV consumes a small amount of electric energy
even when turned off.
●
Do not place any objects between the TV remote
control sensor and remote control.
■
Panel maintenance
Be sure to turn the TV off with the remote control to
perform the panel maintenance. During the panel
maintenance, LED turns to orange.
During panel maintenance, avoid touching and exerting
any pressure on the screen. (e.g. wiping the screen,
etc.)
There are two types of the maintenance as following.
Normal maintenance automatically starts, and it takes
approx. 10 minutes.
Regular maintenance takes approx. 80 minutes.
When regular maintenance is necessary, the
•
message appears on the screen after turning the
TV off with the remote control. Follow the on-
screen instructions.
During the panel maintenance, a white horizontal
•
line appears on the screen for a while. This is not
a malfunction.
●
For information about panel maintenance, refer to
eHELP (Search by Purpose > All settings > Picture >
Screen settings)
1
2
3
4
21
English
Publicité
