Adjusting The Air Flow Direction; Turbo Fan Operation - Sharp AY-X36RU Mode D'emploi

ADJUSTING THE AIR FLOW DIRECTION

VERTICAL AIR FLOW DIRECTION
1
Press the SWING button to select the
vertical air flow direction.
OFF
: The vertical airflow louver will swing.
:The vertical airflow louver will swing
the same as
MODE
SWING
SLEEP
To stop at the louver at the desired posi-
tion, press the SWING button after hav-
ing the unit operate in louver swinging( )
condition.
• " " will disappear on the remote control.
CAUTION:
Never attempt to adjust the vertical airflow louver
manually.
• Manual adjustment of the vertical airflow louver
could cause the unit to malfunction.
• When the vertical adjustment louver is posi-
tioned at the lowest position in the COOL or
DRY mode for an extended period of time, this
may result in condensation.
HORIZONTAL AIR FLOW DIRECTION
Adjust the horizontal air flow direction using
the louver lever manually.
AYX36RU_OM_3_lang.indb 8
.
: The vertical airflow louver
will stop at the selected po-
sition.
ON/OFF
1
FAN
TURBO
TEMP
louver lever

TURBO FAN OPERATION

The unit runs at extra high fan speed to reach
the desired room temperature faster.
1
In the COOL or HEAT mode, press the
TURBO FAN button.
• " " will be displayed on the remote control.
TO CANCEL
Press the TURBO FAN button again.
• " " will disappear on the remote control.
ON/OFF
MODE
SWING
SLEEP
COMFORT
CLOCK
TIMER
ON
NOTE:
• When the unit is turned off, the use of the TUR-
BO FAN operation will be memorized, and it will
be activated the next time you turn on the unit.
• TURBO FAN operation is not available in AUTO,
DRY or FAN mode.
EN-8
FAN
1
TURBO
TEMP
DISPLAY
TIMER
OFF
2014-09-10 19:58:14