Télécharger Imprimer la page

Nakayama MB7000 CLASSIC Mode D'emploi page 6

Masquer les pouces Voir aussi pour MB7000 CLASSIC:

Publicité

EN
Work Time
Content of
Maintenance
Check and tighten Bolts & Nuts
Check and add new engine oil
Clean and change engine oil
Check if there's oil leakage
Clean dirt, weeds, and oil stains
Solve problems
Adjust operating parts
Friction disk
Gears and bearings
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes
significantly affect the performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands
may also concern other models of the manufacturer's product line with similar features and may not be included in the product you just acquired.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and
special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.
* Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause malfunctions or even serious
injury or death. The manufacturer and the importer shall not be liable for injuries and damages resulting from the use of non-conforming equipment.
6
After 8 Hours
Every Day
First Month or
After 20 Hours
(First time)
WWW.NIKOLAOUTOOLS.COM
After the first
After the third
month or after 20
month or after
Hours
150 Hours
(Third time and
(Second time)
thereafter)
Every year or
Every 2 years or
1.000 Hours
2.000 Hours

Publicité

loading

Ce manuel est également adapté pour:

011736