Publicité
PRECAUTIONS
1. Do not attempt to disassemble the camera
To prevent electric shock, do not remove screws
or cover. There are no user-service parts inside.
Refer servicing to qualified service personnel.
2. Handle the camera with care
Do not abuse the camera. Avoid striking or shak-
ing it. The camera could be damaged by improper
handing or storage.
3. Do not expose the camera to rain or moisture,
avoid operation in wet areas.
Do take immediate action if the camera should
become wet. Turn the power off and request ser-
vicing to qualified service personnel. Moisture can
damage the camera and also create the danger of
electric shock.
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
KR222
GP-
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
4. Never aim the camera at the sun
Whether the camera is in use or not, never aim it at
the sun or an extremely bright object laser beam
etc., as this could cause a damage of CCD image
sensor or smear on the picture.
5. Do not operate the camera beyond its
temperature, humidity or power source ratings.
(a) Designed for indoor use
(b) Ambient temperature must not range beyond
−10° C +50° C (14° F + 122° F).
(c) Avoid using the camera when humidity is
above 90%.
(d) The input power source is 12 V DC, 300mA.
-3-
DC 12V IN
OFF
ELC
SOFT
OFF
OFF
POWER
(AWC)
S VIDEO OUT
VIDEO OUT
R
L
-4-
AGC ON
ALC
SHARP
BLC ON
ATW ON
B
VIDEO
LEVEL
H
Publicité
