Publicité
FAN INSTALLATION
Removing the wiring cover
If you need to remove the wiring cover, use a long, thin object such as a small Allen
wrench or pen tip to press the recessed tab on the wiring cover (Fig. 11.2). While
pressing the tab, turn the cover counterclockwise (Fig. 11.2) and slide down to remove
(Fig. 11.3).
Fig. 11.2
12. Install lower cover
Insert tabs on lower cover into slots on bottom of motor unit, aligning the yellow arrow
stickers. Twist lower cover clockwise until you hear and feel it click into place (Fig. 12).
Fig. 12
Lower Cover
20
Fig. 11.3
Wiring Cover
Publicité
