Publicité
V1.1
b.
the ground clamp;
c.
the electrode or welding wire;
d.
any metal parts on the electrode holder or wire feed torch.
2.
Insulate yourself from the electrical current and ground using dry
insulating mats or covers big enough to prevent physical contact with the
workpiece or ground.
3.
Disconnect the tool from the power source before cleaning, servicing,
changing parts/accessories or when not in use.
4.
Protect yourself against electric shocks when working on electric
equipment. Avoid body contact with grounded surfaces. There is an
increased chance of electrical shock if your body is grounded.
5.
Do not expose the tool to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
6.
Do not disconnect the power cord in place of using the ON/OFF switch on
the tool. This will prevent an accidental startup when the power cord is
plugged into the power supply.
7.
Do not alter any parts of the tool or accessories. All parts and accessories are
designed with built-in safety features that may be compromised if altered.
8.
Make certain the power source conforms to requirements of your
equipment (see Specifications).
9.
When wiring an electrically driven device, follow all electrical and safety
codes, as well as the most recent Canadian Electrical Code (CE) and
Canadian Centre for Occupational Health and Safety (CCOHS).
WARNING! All wiring should be performed by a qualified electrician.
ELECTRIC POWER TOOL PRECAUTIONS
This equipment requires a dedicated 120 volt, 20 amp single-phase alternating
current circuit equipped with a similarly rated circuit breaker or slow blow
fuse. Do not run other appliances, lights, tools or equipment on the circuit
while operating this welding unit.
1.
Do not use a power tool with a broken or inoperative trigger/power switch
or safety guard.
2.
Make sure the power switch is in the OFF position before connecting the
tool to the power supply.
3.
Do not drape or carry coiled welding cables on your body when the cables
are plugged into the welding unit.
Visit www.princessauto.com for more information
90A Flux Core Welder
9195264
9
Publicité
