Publicité
V1.1
CAUTION!
NOTICE!
WORK AREA
1.
Operate in a safe work environment. Keep your work area clean, well-lit
and free of distractions.
2.
Keep anyone not wearing the appropriate safety equipment away from the
work area.
3.
Store tools properly in a safe and dry location. Keep tools out of the reach
of children.
4.
Do not install or use in the presence of flammable gases, dust or liquids.
5.
Check that the work area is free from fires, sparks or hot debris before
leaving.
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by the Canadian
Standards Association (CSA) or American National Standards Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1.
Non-skid footwear is recommended to maintain footing and balance in the
work environment.
2.
Steel toe footwear or steel toe caps to prevent injury from falling objects.
HEAD PROTECTION
DANGER! Never look directly at the welding arc without the proper
protection. The light can cause flash burn damage and impair vision.
Although treatment is possible, multiple occurrences can result in
permanent eye damage.
1.
Protect your eyes from welding light by wearing a welder's helmet fitted
with a filter shade suitable for the type of welding you are doing. The
welding process produces intense white light, infrared and ultraviolet
light, these arc rays can burn both eyes and skin.
a.
Consult the Welding Shade Guide in Appendix A for the minimum
shade to protect the eyes based on the amperage and type of
welding.
Visit www.princessauto.com for more information
90A Flux Core Welder
This notice indicates a potentially hazardous situation that may
result in minor or moderate injury if proper practices are not
taken.
This notice indicates that a specific hazard or unsafe practice will
result in equipment or property damage, but not personal injury.
9195264
3
Publicité
