Publicité
9195264
SPECIFICATIONS
Input Voltage
Duty Cycle
Metal Type
Current Range
Max. Amperage Draw
Mild Steel Weld Thickness Range
AC/DC Output
Electrode Type
Electrode Size
Dimensions
INTRODUCTION
Your new MIG (Metal Inert Gas) wire feed welder is designed for maintenance
and sheet metal fabrication. The welding unit consists of a single-phase power
transformer, stabilizer, rectifier and a wire feeder. The welding unit features a
stepless wire feed speed setting and includes thermal protection.
SAFETY
WARNING! Read and understand all instructions before using this tool. The
operator must follow basic precautions to reduce the risk of personal injury
and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or inspection and
maintenance instructions.
HAZARD DEFINITIONS
Please familiarize yourself with the hazard notices found in this manual. A
notice is an alert that there is a possibility of property damage, injury or death
if certain instructions are not followed.
DANGER!
WARNING!
2
90A Flux Core Welder
This notice indicates an immediate and specific hazard that will
result in severe personal injury or death if the proper
precautions are not taken.
This notice indicates a specific hazard or unsafe practice that
could result in severe personal injury or death if the proper
precautions are not taken.
120V AC
20% at 90A
Carbon Steel
60 to 125A (peak 125A)
125A
18 gauge to 3/16 in.
AC
Flux core wire
0.030 / 0.035 in.
19-3/4 x 11-1/2 x 18 in.
For technical questions call 1-800-665-8685
V1.1
Publicité
