3. The frequency of the checks on internal wiring may vary according to
external conditions (i.e. presence of dust) and repeated usage.
4. As a general rule, we recommend a sight inspection every six months or at
least within one year after the purchase of the podoscope, to ascertain
whether there is no wear and tear in the cable or in the electric
connections.
If you have to replace one of the fuses, open the fuse holder placed in the
position indicated in the picture on page 19.
Then get out the blown fuse with a suitable instrument and replace it with
a T 0,5 A – 5x20 250V fuse.
If you have to replace the power cord, the new one must have the same
characteristics and certification of the original one.
In the case of troubles or needs to replace spare parts, always contact the
producer.
WARNING: all maintenance should be done only after
disconnecting the device from the electrical mains.
LED REPLACEMENT
In case of troubles with LED, please contact the Technical Assistance Service.
Do not make direct operations, as Warranty shall become void.
WARNING: all the operations to replace led should be made only
by the authorized technical assistance.
ENGLISH
24