Publicité
LOADING THE BATTERIES
(Batteries supplied with the unit should be loaded in compartment before you use
the blood pressure monitor.)
1
2
3
REMOVING THE BATTERIES
• When the icon
batteries with four new ones. All four batteries should be changed at once.
• Adjust the clock after changing the batteries.
• The data stored in the memory is not deleted by changing the batteries.
• Do not use rechargeable batteries.
• Do not use alkaline (LR6) and manganese (R6P) batteries together.
• Batteries included are for demonstration purposes only. Battery life may be
shorter than specified.
• When disposing of used batteries, comply with governmental regulations or
environmental public institution's rules that apply in your country/area.
00̲CH-456̲All.indb Eng-7
00̲CH-456̲All.indb Eng-7
* When you install the batteries for the first time after purchase, the monitor will
display the clock setting screen. Follow step 2 and subsequent steps in TIME
ADJUSTMENT (
Open the cover of battery compartment.
Pressing the hook down, pull the cover toward you to open.
* If the Blood pressure monitor is
left unused for an extended period
of time, the batteries should be
removed from the compartment.
Place batteries in the compartment.
Put the batteries paying attention to the positive
and negative terminal symbols
Close the battery cover.
Fitting the lugs of the cover at the mating
recesses of the battery compartment body,
push the hook to close the cover.
is displayed or nothing appears in the display, replace the old
: The remaining capacity of the batteries is inadequate.
See page 9) to set the clock.
4 "AA" batteries
Battery
compartment
and
.
- Eng 7 -
Lug (projecting
section)
Battery cover
Hook
Fit the lugs
(projections)
at the
recesses.
2015/02/19 18:51:38
2015/02/19 18:51:38
Publicité
