Télécharger Imprimer la page

Citizen CH-456 Manuel D'instructions page 13

Masquer les pouces Voir aussi pour CH-456:

Publicité

5
Hypertension
classification indicator
(
6
[Manual pressurization]
• If your systolic blood pressure is expected to exceed 200 mmHg, use Manual
pressurization when taking a measurement.
• Keep "
stop pressurization is reached (approximately 40 mmHg higher than the Systolic
blood pressure). You can stop pressurization by the unit by releasing the switch at the
aforementioned value is reached.
The upper pressure limit is 280 mmHg
• If the Body movement indicator is displayed, measure your blood pressure
• Measurement may not be correct if your heartbeat fluctuates greatly during
00̲CH-456̲All.indb Eng-12
00̲CH-456̲All.indb Eng-12
The measurement results are displayed.
See page 13)
Finishing measurement.
• Press the "
START/STOP" switch to turn the monitor off.
• After taking the blood pressure measurement, pressing the "
STOP" switch will turn the monitor off. However, if you do not press the
switch, the monitor's Auto OFF function will automatically turn the monitor off
after 3 minute.
START/STOP" switch held pressed until the pressure value you want to
The Body movement indicator is displayed on the measurement results
display if you move your hand or arm during measurement, causing a
substantial pressure change to be detected.
again.
If an irregular heartbeat is detected during measurement, the Irregular
heartbeat (IHB) indicator is displayed after measurement is completed.
An irregular heart beat is defined as a heart beat that varies by ±25%
from the middle of 5 heart beat intervals during the blood pressure
measurement.
measurement. If the Irregular heartbeat (IHB) indicator is displayed, measure
your blood pressure again.
If the Irregular heartbeat (IHB) indicator appears frequently, you
Caution
are advised to consult a doctor about your health condition.
• Once measurement is complete, the
cuff deflates and the measurement
results (systolic/diastolic blood pressure
values, pulse) are displayed.
* Provided there is no error in the
measurement results, they are stored
automatically.
- Eng 12 -
START/
2015/02/19 18:51:41
2015/02/19 18:51:41

Publicité

loading