Meeting Around A Table - HumanTechnik CM-1 Mode D'emploi

Meeting "around a table"
1. Set your hearing aid to "T" or "MT" in order to transmit sound information direct-
ly to the T-coil in your hearing aid via the teleloop, or connect a headset to a
CM-1 receiver.
2. Slide the mode selector switch to the Zoom position.
3. Position your CM-1 transmitter as close as possible to the speaker, whereby
the device's microphone unit should be pointing as directly as possible
towards the speaker.
4. Switch the CM-1 transmitter and CM-1 receiver on at the on/off switch.
5. Adjust the speech volume to a comfortable level by setting the volume con-
troller on your CM-1 receiver to an appropriate level.
36 English
→ You are taking part in the meeting shown.
→ The other people are speaking at different
levels.
→ Use the "Zoom" transmission mode to reduce
disruptive sounds from behind perceptibly
and, at the same time, to amplify speech in
front of you.