HumanTechnik CM-1 Mode D'emploi page 30

No. Control feature
3 Mode
selector switch
4 On/off switch
Audio/micro-
5
phone in jack
30 English
Function and application CM-1 transmitter
Switch Super Zoom Dialogue: audibly reduces dis-
setting
Zoom
Omni
Switch On
setting
Off
Facility for connecting the CM-1 transmitter directly to your
television or music system. Use the audio cable supplied.
Instead of an audio cable, you can also connect an
external microphone (special accessory). (If an external
microphone is used, the built-in microphone will be swit-
ched off automatically.)
ruptive sounds from the sides and
from behind. When the device is
switched on, the change to this
switch position is indicated acous-
tically by three signal pulses.
Meeting: audibly reduces dis-
ruptive sounds from behind and,
at the same time, amplifies sig-
nals from in front. When the devi-
ce is switched on, the change to
this switch position is indicated
acoustically by two signal pulses.
Presentation: amplifies the sig-
nals from all directions. When the
device is switched on, the change
to this switch position is indicated
acoustically by a signal pulse.
Push the switch up to activate
your CM-1 transmitter
Push the switch down to de-
activate your CM-1 transmitter