Publicité
Abrasive cutting discs are intended for
peripheral grinding; Lateral forces applied
to these discs can cause them to break
into pieces.
Always use disc flanges that are
undamaged and of the correct size and
shape for the disc selected.
Proper disc flanges support the disc, thus
reducing the possibility of breakage. The
flanges for cutting discs may be different
from those for grinding discs.
Do not use worn blades from larger
power tools.
A disc for a larger power tool is not
suitable for the higher speed of smaller
tools and may break.
When using dual-use discs, use the
correct protection system for the
operation being performed.
If the correct protection is not used, a
sufficient level of protection may not be
obtained, which could result in serious
injury.
ADDITIONAL SAFETY WARNINGS
Use the tool in a well-ventilated area.
If used in the same room with other gas or
fuel tools, it must be well ventilated.
Make sure that sparks resulting from use
do not create a hazard, for example, that
they do not reach people or flammable
substances.
Place the tool away from combustible
material, such as textile materials,
cardboard, paper... Do not place inflatable
material in the vicinity of the tool.
CAUTION: To avoid overheating, do not
cover the tool.
Before plugging in the battery charger,
check that the voltage indicated on the
nameplate matches the mains voltage.
Use the tool only with the specific
electrical base/connector, supplied with
the tool.
If any of the tool casings break,
immediately remove the battery from the
tool to avoid possible electrical shock.
Do not use the tool if it has been dropped,
there are visible signs of damage, or if it is
leaking.
Do not grind any materials containing
asbestos. When working with asbestos
and/or silica disc, the dust produced is
harmful to health. Avoid inhalation of
these types of dust by following the
corresponding safety and hygiene
regulations.
This tool is not suitable for use in the
presence of flammable anesthetic
mixtures with air or with oxygen or
nitrogen oxide.
Protect yourself from contact and
inhalation of dust created by sanding
wood and metal surfaces and surfaces
coated with lead paint. Use protective
equipment that complies with the
corresponding safety and hygiene
regulations.
Remove the battery from the tool and
disconnect the battery when not in use
and before performing any cleaning tasks.
This tool is intended for home use only, not
for professional or industrial use.
This tool is intended for use by adults. Do
not allow it to be used by children or
inexperienced people.
This tool is not a toy. Children should be
supervised to ensure that they do not play
with it.
Do not use the tool on any part of the
body of a person or animal.
CAUTION: Do not leave the tool running
while sleeping; there is a risk of injury.
Publicité
