Publicité
EN
(Original instructions)
CAG71051
Cord Angle Grinder
Dear customer, We thank you for choosing
to purchase a product from the Casals
brand. A continuous effort in innovation
and the strictest quality controls allow
Casals to develop powerful electric tools
for the toughest jobs.
GENERAL SAFETY WARNING FOR
POWER TOOLS
WARNING: Refer to the safety warnings
and instructions, illustrations, and
specifications provided with this power
tool.
Failure to follow the instructions could
result in electric shock, fire, and/or serious
injury.
Keep warnings and instructions for future
reference.
The term "power tool" in the warnings
refers to your mains-powered (corded) or
cordless (battery) power tool.
WORK AREA SAFETY Keep the work
area clean and well lit.
Disorganized or dark areas can cause
accidents.
Do not use electrical tools in explosive
atmospheres, or in the presence of
liquids, gases, or flammable dust.
Electric tools generate sparks that can
ignite dust or vapors.
Keep children and other people away
while operating an electric tool.
Distractions can cause you to lose control
of the device.
ELECTRICAL SAFETY Electrical tool
plugs must match the power outlet. Do
not modify the plug. Do not use any
grounded plug adapter with electrical
tools.
Unmodified plugs and proper power
outlets reduce the risk of electric shock.
Avoid body contact with grounded
surfaces such as pipes, radiators, stoves,
and refrigerators.
There is a higher risk of electric shock if
your body is grounded.
Do not expose power tools to rain or
humid conditions.
If liquids enter the power tool, the risk of
electric shock increases.
Do not force the cable. Do not use the
cable to carry, pull, or unplug the power
tool. Keep the cable away from heat, oil,
sharp edges, or moving parts.
Damaged or tangled cables increase the
risk of electric shock.
When using an electric tool outdoors, use
an extension cord approved for outdoor
use. Using this type of cord reduces the
risk of electric shock.
If the use of electrical equipment in a
damp environment cannot be avoided,
install a residual-current device. The use
of such a switch reduces the risk of
electric shock.
Publicité
