Publicité
If using the electrical appliance in a
humid environment cannot be avoided,
install a differential switch.
Using such a switch reduces the risk of
electric shock.
PERSONAL SAFETY Be alert, give your
full attention to the work and use
common sense when operating a power
tool. Do not use the device when you are
tired or under the influence of alcohol,
narcotics or medication.
A moment of inattention while operating
power tools can result in serious personal
injury.
Use personal protective equipment.
Always wear eye protection.
Protective equipment such as a dust
mask, non-slip safety shoes, hard hat, or
hearing protection, used in appropriate
conditions, will reduce injuries.
Prevent the appliance from starting
inadvertently. Make sure the switch is in
the off position before connecting to
power source and/or a battery, and
picking up or carrying the tool.
Carrying power tools with your finger on
the switch or energizing power tools that
have the switch on can cause accidents.
Before turning on the power tool,
remove the adjustment wrenches or
wrenches.
A wrench or open-end wrench caught on
a rotating part of the tool can cause injury.
Avoid forced postures when working.
Maintain balance and stability at all
times.
This will make the tool easier to control in
unexpected situations.
Wear appropriate work clothing. Avoid
wearing loose clothing and jewelry to
work. Keep hair and clothing away from
moving parts.
Loose clothing, jewelry, or long hair can
get caught in moving parts.
If it is possible to install a dust extraction
or collection device, ensure that it is
connected and used correctly.
The use of dust collection devices can
reduce dust-related risks.
Avoid frequent tool use that makes you
overconfident and ignore tool safety
principles.
A careless action can cause serious
injuries in a fraction of a second.
USE AND CARE OF POWER TOOLS Do
not overload the power tool. Use the
appropriate tool for your application.
The power tool will perform better and
safer if used within the specified power
range.
Do not use the tool if the on/off switch is
defective.
A power tool that cannot be turned on
and off via the switch is dangerous and
must be repaired.
Publicité
