Publicité
Disconnect the mains plug and/or
remove the battery pack from the
power tool before making any
adjustments, changing accessories or
storing it.
This will prevent accidental starting of the
tool.
Store the power tool turned off out of
the reach of children and do not allow
persons unfamiliar with it, or these
instructions, to operate it.
Power tools are dangerous in the hands of
inexperienced users.
Maintain your power tool and its
accessories well. Check the alignment of
moving parts or jams, that there are no
broken parts or any other circumstance
that may affect the proper operation of
the power tool. If damaged, have the
power tool repaired before using it.
Many accidents are caused by poorly
maintained power tools.
Keep cutting tools sharp and clean.
Well-maintained cutting tools with sharp
cutting edges are less likely to jam and
are easier to control.
Use the power tool, accessories and bits,
etc., in accordance with these
instructions, taking into account the
conditions and the work to be
performed.
Using the power tool for purposes other
than its intended use may be dangerous.
Keep handles and gripping surfaces dry,
clean and free of oil and grease.
Slippery handles and gripping surfaces do
not allow for safe handling and control of
the tool in unexpected situations.
SAFETY WARNINGS FOR GRINDERS This
power tool is designed to operate as a
grinder. Read the safety warnings,
instructions, illustrations and
specifications supplied with this tool.
Failure to follow the following instructions
may result in electric shock, fire and/or
serious injury.
Do not perform sanding, planing,
polishing, circular cutting or trimming
work with this power tool.
Work for which the power tool is not
designed can create a hazard and cause
personal injury.
Do not handle this power tool for use in
any manner other than that designed
and specified by the manufacturer.
Such transformation can cause a loss of
control and cause serious personal injury.
Do not use accessories that are not
specifically designed and recommended
by the manufacturer.
Just because an accessory can be
attached to your power tool does not
mean that it is safe to use.
The permissible revolutions of the
accessory must be at least equal to the
maximum revolutions indicated on the
power tool.
Accessories traveling faster than their
specified speed may break and be
thrown.
The outside diameter and thickness of
your accessory must be within the rated
capacity of your power tool.
Accessories of incorrect dimensions
cannot be adequately protected or
controlled.
Publicité
