LIVARNO home HG11428A Instructions De Montage Et Consignes De Sécurité page 7

FABRIC SHOE STORAGE CABINET
˜ Introduction
We congratulate you on the purchase of your new
product. You have chosen a high quality product.
Familiarise yourself with the product before using it
for the first time. In addition, please carefully refer
to the operating instructions and the safety advice
below. Only use the product as instructed and only
for the indicated field of application. Keep these
instructions in a safe place. If you pass the product
on to anyone else, please ensure that you also
pass on all the documentation with it.
˜ Intended use
The product is not designed for commercial use.
The product is designed for indoor use.
˜ Scope of delivery
1x fabric Shoe Storage Cabinet, unassembled
1x set of assembly material
1x assembly instructions
˜ Technical data
Dimensions:
Material:
Maximum load-bearing
capacity of the shelves: 2 kg each
Date of manufacture
(month/year):
Safety information
WARNING!
LIFE AND RISK OF ACCIDENTS
FOR INFANTS AND CHILDREN!
Never leave children unattended with the
packaging material and the product. There is a
risk of suffocation from the packaging material.
Children often underestimate the dangers.
Keep children away from the product. The
product is not a toy.
approx. 60 x 166 x
32 cm (W x H x D)
100 % polypropylene
12/2023
DANGER TO
m
Risk of injury!
Ensure correct stability before using the
product.
Place the product on a level surface.
The product may only be used under adult
supervision and may not be used as a toy.
Check the product for damage or wear before
each use.
Please ensure that the product is assembled
correctly and in accordance with these
instructions for use. Incorrect assembly can
lead to injury and may impede safety and
function.
Please ensure that the wall is suitable for wall
mounting of the product. Unsuitable underlying
wall surfaces can lead to injury.
Warning: In order to prevent overturning, this
product must be used with the wall attachment
device provided.
˜ Assembly
Important: The assembly of the product should
be undertaken by at least two persons.
You will need the following tools for the
assembly of the product, not included in the
scope of delivery: Phillips head screwdriver, a
hammer and a suitable drill.
Note: You can attach the hanging rail to
the left or right side. Decide on a side prior
to assembly and assemble the product
accordingly.
1. Assemble the product on a level surface, as
shown in figure C.
2. The product must be fixed to the wall for safety
(figure F).
Note: Do not place objects on the top surface
of the product.
GB/IE/NI 7