Publicité
...notes on wide screen features
Various broadcast stations now transmit movies and programs in true wide screen format.
Built into your TV is software that detects these signals and automatically switches your TV to the
correct format. However, some broadcasters do not transmit this automatic sensing signal, and so
your TV will not recognise which format is being transmitted. This situation can be overcome by simply
auto format
Auto mode automatically detects various screen formats
that are transmitted in either conventional (4:3) or wide screen
(16:9 or 14:9) format. After detecting which signal is being
transmitted the TV will automatically switch to the correct
screen ratio. In example 1 (right) a 4:3 conventional picture
format is shown SEE 4:3 format below.
Hitachi recommend AUTO is selected for the majority of
analogue TV viewing.
Note: The auto format feature for setting the screen size does
not work on all digital signals. If a picture appears 'squashed'
on the screen press the 16:9 button
the desired screen size setting is found.
4:3 format
The conventional picture format for most broadcasts is the
4:3 ratio. Black bars are seen at the sides of the screen
and thie picture shapes are consistent with
non-widescreen TV's (see right).
16:9 format
The picture (right) illustrates a true 16:9 wide screen
picture format. This type of picture fills the entire TV
The 16:9 mode can also be manually selected if desired by
pressing the
14:9 format
The 14:9 format (right) is the medium between the 4:3
and 16:9 ratio signals. When this mode is selected thin
black bars appear to the sides of the screen.
All manuals and user guides at all-guides.com
pressing the
key on your handset.
on your handset until
screen.
button on your handset
25
Publicité
