...notes on modem
The modem hardware built into your Hitachi digital television, with the addition of external equipment
(not supplied) allows you to interact with your TV. In conjunction with the card slots at the rear of the TV this will
offer you future services such as home shopping, banking facilities, sports events and home premieres.To
access these facilities a modem lead and adaptor must be purchased. This lead will have two plugs - a
RJ11 plug for connection to your TV, and a 431A plug which is connected to your existing
telephone line (with the help of an adaptor - see illustration below).
Follow the instructions below on how to set up your modem to obtain these future services.
1. Only use this equipment as a modem connected to your Public Switched Telephone
Network - any other usage will invalidate the UK BABT Approval of your TV's modem.
2. Do not connect this modem to a shared service, or use it as an extension to a
3. Each piece of connected equipment should remain operational providing the total sum of the REN
numbers is no greater than 4 (see external equipment connection - digital on page 10).
modem connection
RF OUT
rear of TV
existing
telephone
Insert the smaller RJ11 plug into the rear
1
socket of your TV marked
Connect your telephone to one of the
3
sockets of the adaptor.
In digital mode press and hold the MENU button
1
for 5 seconds until the INSTALL option in the
MAIN MENU appears.
Press the cursor down button to select
2
3
Once highlighted, accept selection.
All manuals and user guides at all-guides.com
pay phone or connect it to one.
SERIAL PORT
C.1
LINE
C.2
AV2
1
431A plug
RJ11 plug
INSTALL
2 X 12W
8
S
C
R
L
L
R
AUDIO LINE OUT
AV1
dual outlet adaptor
2
3
Connect the 431A plug of the modem
2
lead to a socket of the dual outlet adaptor.
Connect the dual outlet adaptor to your
4
4
wall socket
phone outlet
existing phone socket.
43