Publicité
Measure
Initio2 CO
meter
2
Ref : 211 060
Example with the Foxy interface:
Set-up is complete, the value displayed is now the ����
are %.
4.2 Jack socket
The 3.5mm jack socket is for connection of the Initio2 to a Groomy
for example. The voltage supplied varies between 0 and 5V. So that:
5. WI-FI communication
Using the WIFI (ref 451 470) module, data can be visualized on a tablet or similar.
5.1 Installation of the WI-FI module
Switch off the Initio2 device to implement the wi-fi module.
5.2 Viewing on a tablet
Once the WIFI module is installed, the tablet must be set-up:
ENGLISH
All manuals and user guides at all-guides.com
-
Start the Generalist
-
Place the icon of a direct input
Select the calibre ±5�� :
-
-
Fill out the customisation tab as below:
-
Click on the disk to save the set-up
-
0% corresponds to 0V
-
10% corresponds to 5V
-
Raise the handle of the Initio2.
-
Remove the back by sliding it down.
-
Place the WI-FI module at the back.
-
Push the module firmly until it clicks. The handle must be able to retract without
forcing.
-
Press the Menu button.
-
Select Settings.
-
Select Network.
on the desired axis
rate with symbol [CO2] and the units
2
12
®
interface (ref 181 000)
Publicité
