Télécharger Imprimer la page

Jeulin Initio2 Mode D'emploi page 11

Publicité

Measure
Initio2 CO
meter
2
Ref : 211 060
Back (2):
The "Back" button (2) is used to switch from one type of display to another from the main
screen in the following order:
Within a menu it is used to go back a step.
Menu (4):
This button displays Initio2's main menu.
2.6 Data acquisition
Initio 2 has an internal memory to save measurements. Two modes are available:
Acquisition is on a point by point basis. Each measurement is manually saved by the user
(see below)
Data acquisition takes place as a function of time, according to a duration entered by the
user
2.6.1 Manual acquisition
2.6.2 Time acquisition
Data acquisitions based on time last between 60 seconds and 50 hours. The interval
between two measurements adjusts automatically.
2.6.3 Recording the data
Once the acquisition is complete (time or manual) it must be saved to be able to retrieve the
points on a computer.
ENGLISH
All manuals and user guides at all-guides.com
-
Measurement
-
Table
-
Curve
-
Manual acquisition
-
Time acquisition
-
Press the Menu button (4)
-
Using the rotating wheel (3), select Acquisition and confirm by a short press on the
rotating wheel (3).
-
Select Manual.
-
To record a measurement, select the Save icon (white circle) and confirm by briefly
pressing the rotating wheel (3).
-
To stop the recording select the Stop icon (black square) and confirm by pressing
the rotating wheel (3). Confirm the selection in the dialogue box.
-
Press the Menu button (4)
-
Using the rotating wheel (3), select Acquisition and confirm by a short press on the
rotating wheel (3).
-
Select Time.
-
Using the rotating wheel (3), select the number defining the duration and press on
the rotating wheel (3).
-
Modify this duration by turning the rotating wheel (3) then confirm by pressing on the
centre of the rotating wheel.
-
If the data acquisition is to loop (return of the acquisition to zero at the end of a
defined period) select Loop
-
Confirm the final choice by selecting OK
-
Press the Menu button (4)
-
Select File and confirm
-
Select Save
10

Publicité

loading

Ce manuel est également adapté pour:

211 060