Publicité
Measure
Initio2 CO
meter
2
Ref : 211 060
Only a single data acquisition can be saved. By selecting Open, you open the last saved
data acquisition.
Transferring the data to the computer
Once the acquisition is complete, it is possible to transfer the data to a computer to process
it:
The data then appears on the screen. Right-clicking the chart provides access to various
graphic tools.
3. Data visualisation
It is possible to view the data at any time in tabular or chart format. To do so, simply press
the Back button (2). The display then toggles between table and chart measurements.
Regardless of the current display, data acquisition can be monitored.
After 5 seconds without activity, the table or chart is displayed in full screen. To again obtain
the associated functions, turn the rotating wheel.
In the table, the arrows situated at the bottom right are used to move between the rows of
the table.
4. Analogue outputs
Initio2 is equipped with banana sockets and 3.5 mm jack sockets.
4.1 Banana sockets
ENGLISH
All manuals and user guides at all-guides.com
-
Install the Initio2 software available at en.jeulin.fr/initio2/
-
Connect the Initio2 to the computer via the USB-��USB cable
-
Launch the Initio2 software
-
Load the saved acquisition by clicking on the icon:
-
Connect the Initio2 to a datalogging interface equipped with direct inputs using
banana leads
-
Set-up the direct input as following:
o
0% corresponds to -5V
o
10% corresponds to +5V
11
Publicité
