Measure
Initio2 CO
meter
2
Ref : 211 060
The module information is displayed on the screen.
6. Settings
Various information concerning the Initio2 device can be obtained by pressing on Menu and
selecting Settings Information
This page displays the serial number of the device and the software version, the battery
charge level and the operating language. The latter is changed by turning the rotating wheel.
7. Update
On
resources/software/free-software.html, the last update for your Initio
version is indicated in the designation.
In order to know the version of your Initio
"Informations".
8. Technical specifications
Calibration
Accuracy
Probe
Analogue output
Communication
Power
Dimensions
9. After-sales service
The device is under a 2-year guarantee, it must be sent back to our workshops.
For any repairs, adjustments or spare parts please contact:
ENGLISH
All manuals and user guides at all-guides.com
-
On the tablet, choose the name of the WI-FI network displayed on the Initio2.
-
Open a web browser.
-
Enter the address displayed by the Initio2 in the address bar of the browser.
our
website
at
0 to 10 %
rate
1 point in the air
±1 %
measurement by infrared
2
-5 V to +5 V via 4 mm safe banana sockets
0 to +5 V via 3.5 mm jack sockets
USB, WI-FI optional
Li-ion battery
95 x 123 x 44 mm
JEULIN – TECHNICAL SUPPORT
468 rue Jacques Monod
CS 21900
27019 EVREUX CEDEX FRANCE
the
address
http://en.jeulin.fr/en-resources/english-
2, press the "Menu" button and then "Setup"
®
+33 (0)2 32 29 40 50
13
®
2 is available. Its