Publicité
GOOD PRACTICES BEFORE FIRST USE
ADJUSTING THE DROPPER SEATPOST HEIGHT
A
Remove the
rockguard
lower part (see
Removing the
battery).
Unscrew the
cable guide bolts
by half a turn
using a 3mm
hex key to allow
movement in the
housing.
B
Slide the
seatpost up or
down and guide
the housing from
the cable inlet
near the toptube.
Be careful to
respect the
minimum and
maximum
insertion marks
on the seatpost.
X
46
Start Guide GAME 150 & 160 / 2025
GOOD PRACTICES BEFORE FIRST USE
SETTING THE SADDLE ANGLE AND HEIGHT
Tighten the
seatpost using a
5mm Allen key,
ensuring that you
do not exceed
the maximum
torque of 5 Nm.
It is essential to set the saddle
height correctly.
Why? Saddle height influences
pedalling. It determines leg
movement. If the saddle is too
high, movement will not be
smooth.
If the saddle is too low,
movement will be uncomfortable
and pedalling with be inefficient.
Correct saddle height will
prevent knee and buttock pain!
Saddle height: sitting on the
saddle, with the seat post
extended, the leg should be
slightly bent. Speak with your
dealer to help correctly setup
saddle height.
47
Start Guide GAME 150 & 160 / 2025
Publicité
