Publicité
BATTERY
INSERTING THE BATTERY
1
Push the battery inside the downtube, with
the handle facing away from the drive unit.
Make sure the cables are put safely out
of the way of the battery to prevent any
damage to the cables.
3
Put the bottom part
of the rockguard
back in place.
34
Start Guide GAME 150 & 160 / 2025
2
Plug the Bosch connector back into the battery.
Align the battery, re-insert and tighten the axle,
push on the plastic housing of the battery cable if
needed. Tighten the axle to 5Nm. Lock the lock by
pushing and turning the key counter-clockwise.
You can also remove the lock if you wish.
4
Rotate the butterfly
clockwise to lock the
rockguard in place.
BATTERY
MOUNTING A POWER MORE
1
Fix the PowerMore mounting bracket
to the bottle cage mounts on the
downtube of the frame with supplied
bolts (or max 12mm long).
3
Place the PowerMore on
the mount and plug in the cable.
2
Remove the charging plug cap by
turning it a ¼ turn and place it on the
bolt of the Drive Unit. It will be held
in place with a magnet.
Push the slack of the cable between the frame
4
and the DU on the right (drive) side of the motor.
35
Start Guide GAME 150 & 160 / 2025
Publicité
