Publicité
Item:
LWRAPA2-25PCS
LWRAPA4-50PCS
LWRAPA2-25PCS-EM
LWRAPA4-50PCS-EM
LWRAPA-OS-PIR-BT
INSTALLATION INSTRUCTIONS
Wiring Diagram:
Figure 18
Emergency Driver Activation:
©2023 Southwire Company, LLC. All rights reserved.*Registered Trademark & Trademark of Southwire Company, LLC.
ARCHITECTURAL WRAP
BLACK (LINE)
ToSource
WHITE (NEUTRAL)
120-277V
GREEN(GND)
Figure 19
800-666-2852 | SOUTHWIRE.COM
•
Make the wire connections Black to Line, White to
Neutral and Green to Ground. Use the supplied
wire nuts to secure the connections. See Figure
FIXTURE
18.
Note: If dimming is desired, pull the Purple and Pink
wires through the hole along with the Black,
White and Green wires. Connect the Purple
and Pink to a compatible 0-10V dimmer.
Note: If installing an Emergency fixture, an
unswitched line direct from the breaker needs
to connect to the fixture red wire. This will
charge the battery back-up.
Approved Dimmers
Make
Leviton
Lutron
1.
If installing an Emergency Fixture, you must
connect the battery backup module to the
emergency driver. See Figure 19.
Model
DD710
DS710
IP710
DVSTV
MS-Z101
DVTV
Publicité
