Publicité
Item:
LWRAPA2-25PCS
LWRAPA4-50PCS
LWRAPA2-25PCS-EM
LWRAPA4-50PCS-EM
LWRAPA-OS-PIR-BT
INSTALLATION INSTRUCTIONS
V-Hook and Chain Mounting Instructions:
See Chart
Chain
V-Hook
Figure 11
Figure 12
Motion Sensor Installation Instructions:
Figure 13
©2023 Southwire Company, LLC. All rights reserved.*Registered Trademark & Trademark of Southwire Company, LLC.
ARCHITECTURAL WRAP
Chain
V-Hook
800-666-2852 | SOUTHWIRE.COM
1. Install mounting hooks (Not Included) spaced according to
the chart below.
2. Place the link that gives you the desired mounting height on
the hook and thread the V-Hook through the last link in the
chain as shown in Figure 11.
Fixture
size
2'
4'
3. Attach the V-Hook to the fixture.
4. Attach your conduit to the knockout. See Figure 12.
5. Make wiring connections shown in the Wiring Diagram.
1.
Remove the plug from the endcap closest to the LED driver.
See Figure 13.
Spacing
19"
41-7/16"
Publicité
