Publicité
MW3036B – Manuel utilisateur / User manual
5.2. Remplacer le cordon de test
WARNING
When replacing the Test Leads, the new ones shall be of
the same or in equal level. The pens must be in good
condition, and level of the pens is：1000V 10A.
Note：If the insulation layer of the Test Leads is damaged, such as the
metal wire of the cable is exposed, then the pen must be replaced.
5.3. Waste disposal
Use a damp cloth and a small amount of detergent to clean the
instrument shell...
Do not use abrasive or chemical solvents.
The instrument should be recycled as electronic waste
6. Accessoires
•
Test Leads Level
• User Manual
• Battery 1,5V AAA
• Cloth bag
• K-Type Thermocouple Probe
：1000V 10A
50
Publicité
