Publicité
MW3036B – Manuel utilisateur / User manual
4.4. Manual Range
Press the "
again to switch to the current range, press and hold to exit manual range
mode.
4.5. Relative Measurements
Press "
" button to enable or disable the relative measurement
function. When relative measurement is enabled, the display value will
be reset.
4.6. AC Current Measurement
1. Turn rotary switch to current range, press the "
the AC Current or frequency measurement. Hold trigger, open the
clamp, and clamp one cable of the measured circuit and the meter will
display the current value measured.
2. In the AC current mode，press and hold "
than 2 seconds to start VFD measurement function.
3. Press "
" button to turn on the inrush current measurement function
while in AC current.
"button to enter manual range mode, press the button
43
" button to select
" button for more
Publicité
