Publicité
PRODUCT INFORMATION
IMPORTANT SAFETY INFORMATION
It is the sole responsibility of the purchaser of MATRIX products to instruct all individuals, whether they are the end user
or supervising personnel on proper usage of the equipment.
It is recommended that all users of MATRIX exercise equipment be informed of the following information prior to its use.
Do not use any equipment in any way other than designed or intended by the manufacturer. It is imperative that MATRIX
equipment be used properly to avoid injury.
INSTALLATION
1.
STABLE AND LEVEL SURFACE: MATRIX exercise equipment must be installed on a stable base and properly leveled.
2. SECURING EQUIPMENT: Manufacturer recommends that all stationary MATRIX strength equipment be secured to the
floor to stabilize equipment and eliminate rocking or tipping over. This must be performed by a licensed contractor.
3. Under no circumstances should you slide equipment across the floor due to risk of tipping. Use proper materials
handling techniques and equipment recommended by OSHA.
All anchor points must be able to withstand 750 lbs. (3.3 kN) pull-out force.
MAINTENANCE
1.
DO NOT use any equipment that is damaged and or has worn or broken parts. Use only replacement parts supplied
by your country's local MATRIX dealer.
2. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. They contain important information. If
unreadable or missing, contact your MATRIX dealer for a replacement.
3. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment as well as keeping
your liability to a minimum. Equipment needs to be inspected at regular intervals.
4. Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so.
MATRIX dealers will provide service and maintenance training at our corporate facility upon request.
ADDITIONAL NOTES
This equipment should only be used in supervised areas where access and control is specifically regulated by the owner.
It is up to the owner to determine who is allowed access to this training equipment. The owner should consider a user's:
degree of reliability, age, experience, etc.
This training equipment meets industry standards for stability when used for its intended purpose in accordance with the
instructions provided by the manufacturer.
This equipment is for indoor use only. This training equipment is a Class S product (designed for use in a commercial
environment such as a fitness facility). This training equipment is in compliance with EN ISO 20957-1 and EN 957-2.
ENGLISH
3
WARNING
DEATH OR SERIOUS INJURY CAN
OCCUR ON THIS EQUIPMENT.
FOLLOW THESE PRECAUTIONS TO
AVOID INJURY!
1. Keep children under the age of 14
away from this strength training
equipment. Teenagers must be
supervised at all times while
using this equipment.
2. This equipment is not intended for
use by persons with reduced
physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or
instruction concerning use of the
equipment by a person
responsible for their safety.
3. All warnings and instructions
should be read and proper
instruction obtained prior to use.
Use this equipment for its
intended purpose ONLY.
4. Inspect the machine before use.
DO NOT use machine if it appears
damaged or inoperable.
5. Do not exceed weight capacity of
this equipment.
6. ALWAYS use a spotter if using free
weights.
7. Balance the weight applied to this
equipment and/or any barbell.
Where applicable, use retention
devices to retain weight discs.
8. Injuries to health may result from
incorrect or excessive training.
Cease exercise if you feel faint or
dizzy. Obtain a medical exam
before beginning an exercise
program.
9. Keep body, clothing, hair, and
fitness accessories free and clear
of all moving parts.
10. Adjustable stops, where
provided, must be used at all
times.
11. When adjusting any adjustable
mechanism (stop position, seat
position, pad location, range of
motion limiter, pulley carriage,
or any other type), make certain
that the adjustable mechanism is
fully engaged prior to use to
prevent unintended motion.
12. Manufacturer recommends that
this equipment be secured to the
floor to stabilize and eliminate
rocking or tipping over. Use a
licensed contractor.
13. If equipment is NOT secured to
floor: NEVER allow resistance
straps, ropes or other means to
be attached to this equipment,
as this may result in serious
injury. NEVER use this equipment
for support during stretching, as
this may result in serious injury.
14. DO NOT REMOVE THIS LABEL.
REPLACE IF DAMAGED OR
ILLEGIBLE.
Plate-loaded / Free Weight Thin
1000368439
Publicité
