Publicité
Disc operations
g Inserting a disc
Press [^] to turn the unit on.
Press [;, CD] to open the sliding door.
With the label of the disc facing towards you, tilt the disc into the
disc tray under the sliding door.
Place the disc onto the spindle in the center and then push the
disc down until it clicks into place.
Click!
Press [;, CD] to close the sliding door.
Keep fingers away from the sliding door when it is closing to avoid
possible minor injuries.
g Removing a disc
Press [;, CD] to open the sliding door.
Hold the center and the top right of the disc and pull the top right
of the disc to unlock it from the spindle.
Tilt the disc so as not to touch the sliding door and remove the
disc.
•
Damage may occur if the sliding door is forced closed.
•
Be careful of CD hitting the sliding door while being removed.
All manuals and user guides at all-guides.com
Press [^] to turn the unit on.
Insert the disc to be played (➡ left).
Press [CD q/h] to start play.
Enables you to program up to 24 tracks.
Press [CD q/h] and then [g].
Press [PROGRAM].
CD: Press the numeric buttons to select the track.
MP3: Press [e,r] to select the album.
•
Press [DISPLAY, –DIMMER] repeatedly during play or pause to view
the current track's information.
•
•
Basic play
Stop
Press [g].
Pause
Press [CD q/h]. Press again to resume play.
Skip track
Press [u/t] or [y/i].
Search the current
Press and hold [u/t] or [y/i].
track (CD)
Skip album (MP3)
Press [e,r].
CD: Press the numeric buttons to select the
Direct access play
(Play starts with the
track.
track you select.)
MP3: Press [e,r] to select the album.
Press [y/i] once and then the
numeric buttons to select the track.
Program play
To program more tracks, continue by pressing the numeric
buttons.
Press [OK] or [CD q/h] to start play.
Press [y/i] once and then the numeric buttons to select
the track.
Press [OK].
To program more tracks, repeat step to .
Press [CD q/h] to start play.
Cancel program
Press [PROGRAM] in the stop mode to clear
mode
"PGM" indicator from the display.
Press [PROGRAM] in the stop mode and then
Replay the program
[CD q/h].
Check program
Press [u/t] or [y/i] when "PGM" is
contents
displayed in the stop mode. To check while
programming, press [PROGRAM] twice after
"PGM" appears and then press [u/t] or
[y/i].
Delete last
Press [DEL] in the stop mode.
programmed track
Clear all
Press [g] in the stop mode.
programmed tracks
"CLR ALL" is displayed. Within 5 seconds,
press the button again to clear all tracks.
The program memory is cleared when you open the sliding door.
Display function
Maximum number of displayable characters: approximately 30
This unit supports ver. 1.0 and 1.1 ID3 tags. Text data that is not
supported will not be displayed.
9
9
Publicité
