Publicité
Setting the clock
This is a 12-hour clock.
Press [CLOCK/TIMER] to select "CLOCK".
Within 5 seconds, press [e,r] to set the time. (Press and hold to
change the time faster.)
Press [OK].
•
To display the clock, press [CLOCK/TIMER].
•
Reset the clock regularly to maintain accuracy.
Play timer
You can set the timer to come on at a certain time to wake you up.
This unit offers 3 optional play timers.
Preparation:
•
Turn the unit on and set the clock (➡ above).
•
Prepare the music source (disc, radio, iPod/iPhone or AUX) and set
the volume.
Press [CLOCK/TIMER] repeatedly to select play timer.
Within 5 seconds, press [e,r] to set the starting time.
Press [OK].
To set the finishing time, repeat step and .
To activate the timer
Press [z, PLAY] repeatedly to turn the selected play timer on.
Press [^] to turn the unit off.
Change the settings
Repeat step to (➡ above).
Change the source
Press [z, PLAY] twice to clear zPLAY
or volume
indicator from the display.
Make changes to the source or volume.
Perform step and (➡ above).
Press [CLOCK/TIMER] repeatedly to select
Check the settings
(When the unit is on
"zPLAY 1", "zPLAY 2" or "zPLAY 3".
or in standby mode)
Cancel
Press [z, PLAY] twice to clear the timer
indicator from the display.
•
The timer will start at the preset time, with the volume increasing
gradually to the preset level.
Sleep timer
The sleep timer can turn the unit off after a set time.
Press [SLEEP] to turn the sleep function on or off.
Press [SLEEP] once to check the remaining time.
•
The play timer and sleep timer can be used together. The sleep timer
always has the priority. Be sure not to overlap the timer settings.
•
When AUTO OFF is ON and the unit is left unused for about
30 minutes, the unit will shut down even if the play time or sleep time
has not expired.
All manuals and user guides at all-guides.com
11
Publicité
