Use And Settings; Displays And Setting Elements - Sensopart IO-Box 50 C S1L8 Série Instructions De Service Et De Montage

Once the operating voltage has been connected, the terminal runs a search for a sensor.
........
searching
sensor...
........
If a sensor is detected, it appears in the display.
5

Use and settings

The IO Box FT 50 C...S1L8 has different operating modes and functions.
They are set via the
5.1

Displays and setting elements

The IO Box FT 50 C...S1L8 has a multiline display. It is equipped with 3 operating keys which enable the selection of
different menu items and the adjustment of settings.
........
Col. Tol.: 3
next
........
CAUTION
Press the keys with fingers only! Do not use pointed objects!
In operating mode, the status of the signal outputs is indicated by the 32 dots (16 at the top and 16 at the bottom) in
the display. A dot shows that the corresponding output is activated.
n
.....
FT 50 C
Prog.
........
24
........
........
ESC
, and keys.
........
- +
........
Fig. 8
ESC 15500998
n
.. . ......
n
.......
ESC
Output activated
IO - Box FT 50 C...S1L8 D - 068-14325- 26.11.2009-00
Mounting and
operating instructions
........ ........
FT 50 C
Prog.
........ ........
ESC