Scale Drawing Of Sensor And Fixing Bracket; Electrical Installation - Sensopart IO-Box 50 C S1L8 Série Instructions De Service Et De Montage

Mounting and
operating instructions
4.3 Scale drawing of sensor and fixing bracket
Neither part is included with the IO Box FT 50 C...S1L8.
Fig. 5

15500270
4.4

Electrical installation

• Connection of supply voltage (GND) and (+24V)
• Connection of colour sensor FT 50 C...S1L8
Supply voltage via (GND) and (+24V)
Serial interface via (RS485 Z/B) and RS485 Y/A
Unused screw-type terminals must not be connected to electric lines.
For the serial interface RS485 a shielded cable must be used.
IO - Box FT 50 C...S1L8 D - 068-14325- 26.11.2009-00
Fig. 3
15300350
�

�
�
�
Fig. 4
15300065
The direction of movement of the
object should be perpendicular to
the sensor's front panel.
With strongly reflective or shiny
object surfaces, incline the sensor
to an angle of approx. 10-30° to the
object's surface.
Fig. 6
15500697
Fig. 7
15501133
23