Publicité
a Fit the brush bearing.
b Fit the brush.
c Fit the brush cover and press it
down until it audibly latches into
place.
Replacing the side brush
We recommend replacing the side
brush after 3 to 6 months.
Note
To avoid damage, do not place the ro-
bot on the laser sensor (LiDAR).
1. Turn the cleaning robot over.
2. Remove the side brush.
Malfunctions often have simple causes
that you can remedy yourself using the
following overview. When in doubt, or
in the case of malfunctions not men-
tioned here, please contact your autho-
rized Customer Service.
24
3. Install the new side brush.
The battery has reached the end of its
service life if the cleaning robot con-
stantly travels to the station for
charging after a short cleaning opera-
tion.
1. Switch off the cleaning robot, see
2. Send the cleaning robot to Custom-
Troubleshooting guide
English
Replacing the battery
chapter Switching off the cleaning
robot.
er Service. Observe the regulations
for shipping lithium-ion batteries,
see chapter Transport.
Publicité
