Publicité
Collision sensor
1
Infrared sensor
2
Laser sensor (LiDAR)
3
Top cover
4
Side brush
5
Steering roller
6
Battery compartment
7
Brush
8
Fall sensor
9
Wiper cloth
10
Wiper cloth holder
11
Battery terminals
12
Brush cover
13
On / Off button
14
"Back to charging station" button
15
Cleaning tool
16
2-in-1 dust container with water res-
17
ervoir
Dust container
18
Charging station
19
Power cord
20
Functional description
The device consists of a charging sta-
tion and a battery-powered cleaning
robot.
The mobile cleaning robot obtains its
energy from a built-in rechargeable
battery. The cleaning robot can clean
for up to 120 minutes with a single bat-
tery charge. It automatically returns to
the charging station to recharge when
the battery charge decreases.
The cleaning robot moves systemati-
cally. It scans the room with a laser
sensor (LiDAR) and then cleans the
room step-by-step. It avoids obstacles
that are at least as high as the LiDAR
tower.
The flat design of the cleaning robot al-
lows it to clean under furniture such as
beds, sofas and cupboards.
The cleaning robot has fall sensors
that detect stairs and steps and can
prevent falls, as well as collision sen-
sors that detect and avoid obstacles.
10
The battery for the cleaning robot is
charged in the charging station.
If the cleaning robot starts the cleaning
work from the charging station, it re-
turns to the charging station when the
battery charge is insufficient.
As soon as the charging process is fin-
ished, the cleaning robot automatically
leaves the charging station and contin-
ues the cleaning work. The cleaning
robot also returns to the charging sta-
tion when it has finished cleaning.
Status displays
LED display
Lights blue
Flashes blue
slowly
Flashes blue
quickly
Flashes green
slowly
Lights green
Flashes red
slowly
Flashes red
quickly
The cleaning robot automatically
switches to sleep mode after 5 minutes
of inactivity. Press any key to wake it
up.
● The cleaning robot does not switch
to sleep mode when it is on the
charging station.
● The cleaning robot turns off auto-
matically if it is in sleep mode for
more than 6 hours
English
Status
Drives autonomously
Autonomous driving is
paused
WLAN connection
mode
Cleaning robot is
charging
Cleaning robot is fully
charged or successful-
ly connected
Battery is too empty to
start
Error case
Functions
Sleep mode
Publicité
