Publicité
4. Install the 2-in-1 dust container with
water reservoir.
a Press the 2-in-1 dust container
with water reservoir into position
until it audibly clicks into place.
b Close the cover at the top.
5. Press the On / Off button.
The cleaning process continues.
Emptying the 2-in-1 dust
container with water reservoir
1. Press any key.
The cleaning robot stops.
2. Remove the 2-in-1 dust container
with water reservoir.
a Open the cover at the top.
b Press the clamp.
c Remove the 2-in-1 dust container
with water reservoir.
3. Empty the 2-in-1 dust container with
water reservoir.
18
a Open the filter flap.
b Remove the filter flap.
c Empty the 2-in-1 dust container
with water reservoir.
d Insert the filter flap.
e Close the filter flap.
4. Install the 2-in-1 dust container with
water reservoir.
a Press the 2-in-1 dust container
with water reservoir into position
until it audibly clicks into place.
b Close the cover at the top.
5. Press the On / Off button.
The cleaning process continues.
Emptying the dust container
1. Press any key.
The cleaning robot stops.
2. Remove the dust container.
English
Publicité
