Publicité
12.4 Disposal of the packaging
The packaging protects the device against damages during transit. The packaging
materials are selected in accordance with environmentally compatible and
recycling-related points of view and can therefore be recycled.
Returning the packaging back to the material loop saves raw materials and reduces the
quantities of accumulated waste. Take any packaging materials that are no longer required
to "Green Dot" recycling collection points for disposal.
► If possible, keep the original packaging for the device for the duration of the guarantee
period of the device, in order that the device can be re-packaged properly in the event of
a guarantee claim.
12.5 Setup
12.5.1
Setup location requirements:
In order to ensure the safe and trouble-free operation of the device, the setup location must
fulfil the following prerequisites:
Place your appliance on a floor that is
strong enough to support the
appliance when it is fully loaded.
Locate the appliance away from direct
sunlight and sources of heat (stove,
heater, radiator, etc.). Direct sunlight
may affect the acrylic coating and
heat sources may increase electrical
consumption.
This unit is not designed for use in a
garage or any other outside
installation.
Do not set up the device in a hot, wet
or extremely damp environment or
near flammable material.
The appliance can be installed
underneath.
WARNING! Do not close the
ventilation openings in the device
housing.
The electrical socket must be easily
accessible so that the power lead can
be disconnected easily, in the case of
an emergency.
The installation and assembly of this
device in non-stationary setup
locations (e.g. on ships) must be
carried out by specialist companies / electricians, provided they guarantee the
prerequisites for the safe use of this device.
For energy saving reasons please ensure that the door is closed when the appliance is
turned on.
Please note
29
Publicité
