Publicité
- Fire hazard: do not store elements on coo-
king surfaces.
- Only counter top protectors designed for
use with the cooking appliance and listed
in the manufacturer's instructions should
be used as suitable protection for the cou-
nter top incorporated in the appliance.
Use of unsuitable protectors may cause
accidents.
- WARNING: Accessible parts will beco-
me hot when in use. To avoid burns and
scalds children should be kept away.
Insert in the fixed wiring a mean for dis-
connection from the supply mains having a
contact separation in all poles that provide
full disconnection under overvoltage cate-
gory III conditions, in accordance with the
wiring rules. The plug or omnipolar switch
must be easily reached on the installed
equipment.
This appliance is not intended to be used
via an external timer or a remote control
system.
The manufacturers decline any responsi-
bility in the event of non-compliance with
what is described above and the accident
prevention norms not being respected and
followed.
To avoid all risk, if the power cable beco-
mes damaged, it must only be replaced by
the manufacturer, by an authorised service
centre, or by a qualified electrician.
User's Instructions
Installation
All operations relative to installation (electric connection) should
be carried out by skilled personnel in conformity with the rules
in force.
As for the specific instructions see part pertaining to installer.
Use
TOUCH CONTROL HEATING ELEMENTS
Touch sensitive keys
All operations can be performed using touch sensitive keys (ca-
pacitive sensors) located on the front of the control board; each
key has a corresponding display. All actions are confirmed by an
audible signal.
TOUCH CONTROL (Fig. 2)
1 ON / OFF
2 Minus -
3 Plus +
4 Double / Triple Circuit
5 Cooking zone
6 Setting level display
7 Dual circuit pilot light
8 Illuminated Segment Multiple Circuits
Switching the Touch Control on/off
After mains voltage is applied, the touch control initialises for ap-
proximately one second before it is ready for use.
All displays and LEDs flash for approximately one second after re-
setting. Once this period is complete, all displays and LEDs switch
off and the touch control is in standby mode.
Press the ON/OFF (1) button to switch the touch control on.
The cooking zone displays indicate "0". If a cooking zone is in
"hot" (high temperature) mode, the display will alternately indi-
cate "H" and "0".
After switching the touch control on, it will remain active for 20
seconds. If no cooking zone is selected, the touch control auto-
matically switches back to standby mode.
The touch control can only be switched on by pressing the ON/
OFF (1) button.
Pressing the ON/OFF (1) button at the same time as other buttons
will have no effect and the touch control will remain on standby.
The touch control can be switched off at any time using the ON/
OFF (1) button. This is even the case when the control has been
locked by the child safety feature.
The ON/OFF (1) button always takes priority in the switching off
function.
Automatic off
Once switched on, the touch control automatically switches off
after 20 seconds of inactivity. After selecting a cooking zone, the
automatic off time is divided into 10 seconds, after which the zone
is deselected and, after another 10 seconds, the touch control
switches off.
Switching a cooking zone on/off
If the touch control is switched on, the cooking zone can be selec-
ted by pressing the button (5) of the corresponding zone.
The display (6) of the zone selected lights up, while the remaining
displays are dimmed. if the cooking zone is "hot", "H" and "0" are
alternately displayed.
Press the PLUS (3) or MINUS (2) button to select a setting and the
Publicité
