Parkside PDZ 25 A1 Instructions D'utilisation Et Consignes De Sécurité page 9
Masquer les pouces
Voir aussi pour PDZ 25 A1:
Publicité
Disconnect the product fully from the com-
pressed air supply when you have finished
work.
Using the accessories
Screw in accessory parts
blow gun
for different application. e. g. fill
5
up ball or inflatable bed, etc. (see Fig. C).
Note: When using the conical nozzle
ball needle
, please also connect the safety
14
valve
as an adapter. Cover the 2 small holes
11
on the side of the safety nozzle
to inflate normally, or release the 2 holes to
lose inflation pressure.
Note: The rubber nozzle
blow out dirt in hard to reach places. Screw the
rubber nozzle
to the blow gun
9
Pump up bicycles /
vehicle tyres
Depending on the structure of your inflation
valve you can use the air chuck
tyre inflator
to pump up bicycle or vehicle
15
tyres. To do this, adapt air chuck
tyre inflator
to the spiral hose
15
For dunlop valve, use the plug adapter
(please refer to "Using the accessories").
You can press the tyre gauge
inflation valve to test the inner pressure of the
tyre.
Cleaning and maintenance
Regularly lubricate and clean the product to ensure
proper functionality.
RISK OF INJURY! Disconnect the product fully
from the compressed air supply before cleaning.
Do not use sharp objects to clean the product.
Do not allow any liquids to enter the product.
Otherwise the product could be damaged.
to
into the
8
14
or
8
with fingers
11
can be used to
9
to use.
5
or the air
7
or the air
7
(see Fig. D).
1
10
against the
16
Do not use harsh or aggressive cleaning agents
such as thinners or petrol as these can dissolve
the plastic parts.
Clean the product regularly, preferably immedi-
ately after every use.
Clean the housing with a soft, dry cloth.
Disposal
The packaging is made entirely of recyclable mate-
rials, which you may dispose of at local recycling
facilities.
Contact your local refuse disposal authority for
more details of how to dispose of your worn-our
product.
Service
Service Great Britain
Tel.:
0800 404 7657
E-Mail: owim@lidl.co.uk
Service Ireland
Service Northern Ireland
Tel.:
1890 930 034
(0,08 EUR / Min., (peak))
(0,06 EUR / Min., (off peak))
E-Mail: owim@lidl.ie
GB/IE/NI
9
Publicité
