Electrical Requirements
IMPORTANT: Observe all governing codes and ordinances.
Required:
A 120-volt, 60 Hz, AC-only, 15- or 20-amp electrical supply
■
with a fuse or circuit breaker.
Recommended:
A time-delay fuse or time-delay circuit breaker
■
A separate circuit serving only this Microwave Drawer
■
GROUNDING INSTRUCTIONS
For all cord connected appliances:
I
The microwave oven must be grounded. In the event of
an electrical short circuit, grounding reduces the risk of
electric shock by providing an escape wire for the electric
current. The microwave oven is equipped with a cord
having a grounding wire with a grounding plug. The plug
must be plugged into an outlet that is properly installed
and grounded.
WARNING:
Improper use of the grounding plug can
result in a risk of electric shock. Consult a qualified
electrician or serviceman if the grounding instructions are
not completely understood, or if doubt exists as to whether
the microwave oven is properly grounded.
Do not use an extension cord. If the power supply cord is
too short, have a qualified electrician or serviceman install
an outlet near the microwave oven. A short power supply
cord is provided to reduce the risks resulting from becoming
entangled in or tripping over a longer cord.
SAVE THESE INSTRUCTIONS
4
07-Aug-2017 04:52:48 EDT | RELEASED
Product Dimensions
1
²³⁄₃₂
15
¹³⁄₃₂
"
(39.1 cm)
*Measurements include front facing of Microwave Drawer.
The drawer opens 15" (38.1 cm).
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
" (4.4 cm)
4¹¹⁄₁₆
23
"
²⁵⁄₃₂
(60.4 cm)
21
¹⁹⁄₃₂
"
(54.9 cm)
" (11.9 cm)
14
"
¹⁹⁄₃₂
(37.1 cm)
"
¹¹⁄₁₆
23
(60.2 cm)*
15" (38.1 cm)