Publicité
OPERATION
WARNING:
Follow the warnings and precau-
tions in the chapter "SAFETY WARNINGS" and
the instruction manual of the power unit.
Operating the tool
WARNING:
Keep hands away from weeding
blade.
WARNING:
Be extremely careful to maintain
control of the tool at all times. Do not allow the
tool to be deflected toward you or anyone in the
work vicinity. Failure to keep control of the tool
could result in serious injury to the bystander and the
operator.
WARNING:
Before weeding, clear away sticks
and stones from the weeding area.
NOTE: This tool is intended for removing weeds less
than 15 cm (5-7/8").
Fig.19
CAUTION:
Avoid operating the tool in very
hot weather as much as practicable. When operat-
ing the tool, be careful of your physical condition.
CAUTION:
Be careful not to accidentally
contact a metal fence or other hard objects while
weeding. The weeding blade may break and cause
an injury.
CAUTION:
Overreaching with the tool, partic-
ularly from a ladder, is extremely dangerous. Do
not work while standing on anything wobbly or infirm.
NOTICE:
Do not use the tool in a way that causes
the motor to stop or to rotate extremely slowly.
Hold the tool with both hands by holding the front han-
dle and the rear grip of the power unit.
2
Fig.20
► 1 . Front handle 2. Rear grip
Turn the tool on with the weeding blade off the ground.
Place the weeding blade on the ground, and pull the
tool toward you slowly to weed. It is easier to work when
the weeding blade is at an angle nearly perpendicular
to the ground.
Fig.21
Fig.22
9 ENGLISH
1
Publicité
