Publicité
6.
Remove sand, stones, nails etc. found within
the working range. Foreign particles may dam-
age the cutting tool and can cause dangerous
kick-backs.
7.
Should the cutting tool hit stones or other hard
objects, immediately switch off the motor and
inspect the cutting tool.
8.
Inspect the cutting tool at short regular inter-
vals for damage (detection of hairline cracks
by means of tapping-noise test).
9.
Always remove the battery cartridge from the
equipment:
—
whenever leaving the equipment
unattended;
—
before clearing a blockage;
—
before checking, cleaning or working on
the equipment;
—
after striking a foreign object;
—
whenever the equipment starts vibrating
abnormally.
10. Cutting means continues to run after the motor
is switched off.
When attaching or removing the blade cover,
11.
be careful not to injure your hands.
Maintenance instructions
1.
The condition of the equipment, in particular of
the cutting tool of the protective devices must
be checked before commencing work.
2.
Turn off the motor and remove the battery
cartridge before carrying out maintenance,
replacing cutting tools or cleaning the equip-
ment or cutting tool.
When not in use, attach the blade cover to the
3.
tool and store the tool indoors in dry, and high
locked-up place, out of reach of children.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity
with product (gained from repeated use) replace
strict adherence to safety rules for the subject
product. MISUSE or failure to follow the safety
rules stated in this instruction manual may cause
serious personal injury.
WARNING:
Use of this product can create
dust containing chemicals which may cause
respiratory or other illnesses. Some examples of
these chemicals are compounds found in pesti-
cides, insecticides, fertilizers and herbicides.
Your risk from these exposures varies, depend-
ing on how often you do this type of work. To
reduce your exposure to these chemicals: work
in a well ventilated area, and work with approved
safety equipment, such as those dust masks that
are specially designed to filter out microscopic
particles.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Warning; Disconnect battery before
maintenance.
Keep your feet away from the weeding
blade.
Keep bystanders and animals at least 5 m
(17 FT) away from the power tool.
Hot surfaces - Burns to fingers or hands.
PARTS DESCRIPTION
Fig.1
► 1 . Blade cover 2. Cap 3. Weeding blade
ASSEMBLY
WARNING:
Before assembling or adjusting
the equipment, switch off the motor and remove
the battery cartridge. Otherwise, the machine may
start unintentionally and result in an injury.
WARNING:
When assembling or adjusting
the equipment, always put it down. Assembling or
adjusting the equipment in an upright position may
result in serious injury.
WARNING:
Follow the warnings and precau-
tions in the chapter "SAFETY WARNINGS" and
the instruction manual of the power unit.
4 ENGLISH
1
3
2
Publicité
