Publicité
Assembling the attachment
1.
Attach the 2 adjusting plates to the attachment so
that the grooves of the plates face outward.
Fig.2
► 1 . Adjusting plate
2.
Attach the weeding blade to the adjusting plates
while opening the blade outward slightly.
When attaching the weeding blade, make sure the
arrow points toward the pipe.
Fig.3
► 1 . Arrow
1
1
The angle of the weeding blade can be changed by
aligning the protrusion on the weeding blade with the
one of the protrusions on the adjusting plates.
Fig.4
► 1 . Protrusion
NOTICE:
Make sure that the arrows on the weed-
ing blade face in the direction shown in the figure.
1
Fig.5
► 1 . Arrow
5 ENGLISH
1
1
Publicité
