Publicité
The auxiliary function controls the AUX power outlet on the control module
which controls the Night Light™.
remote control layout
A. Use the mode key to guide you to the AUX icon.
EN
B. Pressing the up arrow key will activate the Night Light™.
3.3
in the event of a battery failure
C. Pressing the down arrow key will turn the Night Light™ off. A single
If the receiver batteries fail, the appliance will no longer turn on or off. To operate the appliance in the event of
"beep" will confi rm the reception of the command.
a battery failure, the slide switch located on the receiver may be switched to the "ON" position to operate the
appliance.
3.4
eFIRE Controller application
child lock
Napoleon's eFIRE application will revolutionize the way you use your fireplace! We have cracked the code and
present to you the first fireplace to be controlled by Bluetooth technology, using an intuitive app on your mobile
ADD TITLE: Night Light Dimmer Control
device.
If equipped, the auxiliary function controls the Night Light™ with dimmable
control.
When fully equipped (if applicable), the eFIRE application allows you to select from a multitude of colours to suit
A. Use the mode key to guide you to the Night Light™ icon.
your mood or décor simply by scrolling through the colour wheel. Additionally, Napoleon's eFIRE application allows
you to control many other functions of your fireplace, including on/off, flame height, light feature, blower, and a
B. The intensity of the output can be adjusted through 6 levels.
Use the up/down arrow keys to adjust the output level. A single beep
timer to create a schedule for your fireplace that works for you.
will confi rm reception of the command.
ADD TITLE: CONTINUOUS PILOT / INTERMITTENT PILOT (CPI / IPI) SELECTION
Using the instructions on the eFIRE Controller application website http://napoleon.com/efire, install the
application and enjoy the features the eFIRE Controller application has to offer. *
A. When the transmitter is in the off position, use the mode key to guide
you to the CPI mode icon.
* Visit the website or contact your authorized dealer for appliance-specific information and/or frequently asked
B. Press the up/down to switch between IPI and CPI modes. A single
questions regarding features and products available with the eFIRE Controller application.
beep will confi rm reception of the command.
note:
note:
If the appliance is equipped with a CPI/IPI toggle switch, set the CPI/IPI
The remote control is considered the master control for the appliance and can always be used to turn the
to CPI position to enable remote CPI operation. If the switch is set to IPI
then it will only work in IPI regardless of what is set on the remote control
appliance off (ex. the eFIRE Controller application user, in control of the appliance, leaves the home).
handset.
3.5
low battery
ADD TITLE: LOW BATTERY / MANUAL BYPASS
The life span of the remote batteries depends on various factors: quality of the batteries,
the number of ignitions, etc.
When the transmitter batteries are low, a battery icon will appear on the LCD display
before all battery power is lost. When the batteries are replaced, this icon will disappear.
When the receiver batteries are low, no "beep" will be emitted from the receiver when
it receives an on/off command. This in an alert for the receiver that there's low battery.
When the batteries are replaced the "beep" will be emitted from the receiver when the on/off key is pressed.
If the batteries of the receiver or transmitter are low, the appliance can be turned on manually by sliding the
three position slider switch on the receiver to the on position. This will bypass the remote control feature and the
appliance main burner will come on if the gas valve is in the on position.
ADD TITLE: IN THE EVENT OF A POWER FAILURE
If the receiver is equipped with batteries they will enable fl ame height control or on/off function to control the
appliance during a power failure. Blower and Night Light™ operation is not possible. Refer to "appliance
operation" section when communications between receiver and transmitter have been lost. The receiver will
emit a "beep" sound to confi rm programming has been successful once power is restored. During a power
failure, if the appliance was on, the fl ame height will stay at the setting prior to the failure. If off when the failure
occurs and then turned on, the fl ame height will come on at "Hi". The fl ame height can then be controlled by the
remote.
12
W415-4193 / A-0 / 07.23.24
76
73
76
°F
68
ON
°F
Blue LCD Display
OFF
On / Off Key
Temperature Key
Up / Down Arrow Key
Set Temperature
Mode Key
76
Flame Off
Room Temperature
76
SMART
76
68
73
ON
°F
°F
MAX
Set Temperature
76
76
Room Temperature
OFF
SMART
76
68
ON
Flame Off
MAX
76
Set Temperature
76
°F
76
child lock
OFF
Blue LCD Display
SMART
On / Off Key
Blue LCD Display
Temperature Key
On / Off Key
Up / Down Arrow Key
Temperature Key
Flame Off
Up / Down Arrow Key
MAX
76
Mode Key
76
Mode Key
child lock
°F
OFF
73
°F
73
°F
Flame Off
76
child lock
Room Temperature
76
Room Temperature
68
ON
76
68
ON
Set Temperature
Set Temperature
76
SMART
76
SMART
MAX
76
MAX
°F
76
OFF
°F
OFF
Flame Off
23
76
76
°F
°C
OFF
°F
OFF
Flame at level 1
Flame at level 5
°F
°F
23
°C
IPI
OFF
76
°F
°F
°F
°F
Flame at level 1
Flame at level 5
76
OFF
°F
°F
°F
Flame at level 1
Flame at level 5
°F
76
°F
23
°C
23
°C
Flame at level 1
Flame at level 5
°F
°F
°F
°F
°F
76
°F
76
°F
Flame at level 1
68
Hi
76
76
76
°F
ON
°F
°F
Hi
76
76
76
76
°F
°F
68
Hi
76
Flame at "Hi" level 6
°F
76
76
°F
CPI
76
76
°F
76
76
°F
76
76
68
Hi
°F
°F
Hi
Flame at "Hi" level 6
76
76
76
76
°F
°F
76
76
76
IPI
CPI
°F
°F
°F
ON
OFF
Hi
76
°F
ON
OFF
Flame at "Hi" level 6
76
76
°F
76
IPI
CPI
76
76
°F
°F
76
Hi
Flame at "Hi" level 6
76
76
76
°F
°F
IPI
CPI
68
76
°F
68
76
°F
OFF
76
°F
OFF
76
°F
76
Hi
°F
Hi
Flame at level 5
Flame at "Hi" level 6
°F
°F
°F
°F
°F
°F
°F
°F
76
°F
76
°F
°F
°F
°F
76
°F
°F
Hi
76
°F
Hi
76
°F
76
°F
76
°F
76
°F
Publicité
