Publicité
Installation
For more detailed instructions, visit the Samsung website (http://www.samsung.com), go to the Support
section, and then search for your model name.
Step-by-step installation
STEP 1 Door removal for entrance
If the refrigerator cannot pass through the
entrance to your home or kitchen due to its size,
follow these instructions to remove and then
reinstall the refrigerator's doors. If you do not need
to remove the doors, go to page 11 to continue
the installation procedure.
WARNING
Unplug the power cord of the refrigerator before
removing the doors.
Tools required (not provided)
• Phillips screwdriver
• Flat-head screwdriver
• Socket wrench
/
" (10 mm)
3
8
• Pliers
• Allen wrench
/
" (5 mm)
1
4
Detach the doors
CAUTION
The door may fall off or over and damage itself
during any of these steps. To prevent an accident,
use extreme caution when performing these steps.
A
1. Use a Phillips screwdriver to unscrew the hinge
covers (A) on the top of each door.
2. Open the doors to loosen the hinges and
remove the hinge covers. Once the covers are
removed, close the doors.
SBS_RS4000D_DA68-04820F-01_EN.indd 9
SBS_RS4000D_DA68-04820F-01_EN.indd 9
3. Disconnect the electrical harness.
4. Disconnect the two wire connectors on the left
door. The position of the connectors differs with
the model.
CAUTION
• Do not remove both doors simultaneously.
Make sure to remove one door at a time.
Otherwise, any of the doors may fall and cause
physical injury.
• Make sure the refrigerator is off before
disconnecting the connectors.
A
5. Gently lift the clamp.
Installation
9
2024-07-18( )
2024-07-18( )
11:22:54
11:22:54
Publicité
