Publicité
To upload photos/videos on a computer, connect the supplied USB cable to the
camera's USB port and then directly to a main USB port on your computer. The
camera turns on automatically regardless of the selected mode (OFF | SETUP | ON).
The computer will recognize the device as "removable storage".
In the removable storage, you will find "DCIM" then "DCIM/PHOTO" (photo files) and
"DCIM/MOVIE" (video files). You will be able to copy the files to your computer.
MAC computers show an "Unknown" drive on the desktop. When clicking on this
drive, the program iPhoto is automatically started.
WARNING: Do not disconnect the USB cable or remove the memory card while
copying photos/videos. You could lose files.
10.
Setting up the camera
− Mount the camera facing north or south, not east or west as the rising and setting
of the sun could produce false triggers and overexposed images.
− If you're covering a trail, face the camera down or up the trail.
− Clear out any brush or weeds in front of the camera. These can cause false
triggers due to temperature and motions disturbances in front of the camera
(especially in windy days).
− Check the power level of the batteries before setting up the device.
− Make sure the memory card is properly inserted and have sufficient available
space.
− Verify time and date are correct.
− Make sure to turn the camera ON (switch in the ON position).
11.
Technical specifications
Image sensor
Infrared flash
Memory
Lens
LCD screen
PIR sensor
4 Mega Pixels Colour CMOS
36 invisible IR LED | Wavelength: 940 nm
Infrared flash range: approx. 20 m (65 ft.)
Micro SD card from 4GB up to 32GB maximum |
Class 10 minimum
F = 4.3 | F/NO = 2.0 | FOV = 80°
Built-in 2.4" TFT colour screen
Adjustable sensitivity: High | Medium | Low
Detection distance: approx. 20 m (65 ft.)
Detection angle: 60°
Guide PIE1061 – Mars 2024 – ind. C - 35/114
Publicité
